You are currently browsing the site as a "Guest", which means your are either not registered or not logged in. This also means you have limited access to our site and cannot participate - you also are browsing the site with more advertisements than logged-in members.
have to use ## logger or pda with my cable and i have all my programs insstalled at the computer Lino has in his room and the code is on that logger tapped on the back send me a pic of whay Lino took you thay way i know what u need ...through FB
Sup Alonso!!! waattt...if u have ## logger try using that with the cable and it should all b ther if Lino lost something hes gonna get it!!! & ill see wassup ima hitem up and make sure theres not another cable round there
cool man i have a 1g bov but i need to buy a adapter or flange a friend of my gave it to me for free he said its stronger then the ### 2g plastic bov lol so ill be using it soon any other parts you have that you want to sell ?
I'm going to get a smaller torque wrench, one that reads in inches. And try it that way. I don't trust myself to do it the other way. Only because all the teeth on the pp need to line up. Have you tried adjusting the clutch cylinder rod under the dash?
I was having the same problem as the car not wanting to go into gear. I pulled it all apart to again, and it looks like my fork not sitting right on the pivot ball. Because I had shimmed it. I'm going to take off my clutch and retorque it again. Just to be safe. I have all fairly new parts seeing my car has only driven less the a 1000mile in a year. Since I replaced everything. Your vibration might be coming from your pivot ball not being torque down. I had that problem about 5 years ago when I rebuilt my tranny.
DSMtuners is not affiliated with Diamond Star Motors. The Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, Mitsubishi Galant VR-4, and associated logos are trademarks of Diamond Star Motors, Mitsubishi Motors, and Chrysler Corporation.
About Me
Positive
Neutral
Negative
