The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

5spd Transmission

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sorry about that. I just got a new phone. I have a 95 GSX, I got it cheap because it had a broken shift fork and a (blown head gasket) but it was just a valve cover gasket. But I took the motor and transmission out and I finally found someone to work on the transmission and we have been replacing parts I was wondering if anyone knew anything about the (oil feed tube) inside the transmission.
 
Maybe I'm not a transmission guy. The guy showed me what looked like a destroyed plastic washer and said it was part of the oil feed tube and I needed a new one. But I can't find one anywhere. I've looked online and have not found anything. Bought everything else from (jacks transmission)
 
Oil guide plastic disk (under intermediate shaft front bearing race). Part MD726480. Twicks69 or JNZ Tuning has them.
 

Attachments

  • oil guide plastic disk (under front intermediate shaft bearing race).JPG
    oil guide plastic disk (under front intermediate shaft bearing race).JPG
    31.1 KB · Views: 60
Last edited:
That's probably it. It was under a gear or something. Thanks man. I'm gonna look right now. That's the only thing holding me back.

Yes that was definitely it. Thanks.

Ok so now I have a question about the oil guide tubes. I have the printout now for my transmission and the picture shows two oil tubes. I only have one. The tech at my work said it may be that some transmissions have one some have the other. Is this true?
 
It won't load up but I think mine is only supposed to have one (the square shaped one) I talked to the people that I ordered the parts from and they said some have two some have one.
 
Well I did some more checking in the ASA database and it looks like you're right. From what I can make out, it appears the 1g AWD 2.0 turbo tranny has 2 oil guide rails/tubes, where the 2g AWD 2.0 turbo tranny only has 1. Except my 99 Mitsu factory manual shows 2 in the 99 AWD 2.0 turbo tranny so I don't know what's going on.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top