FN01R-C Wheel Offset

[g0tEclipseD]

im getting 5zigen fno1rc's with yokohama 225/45/17 ....im getting them in 17x8 what offset do i need to get?\

for 17x8 with 5x114.3 lug pattern, there is
25, 35,43 mm offset available.

what should i get?

i posted this in NOOB forum but realized this may be a better place to put it

 

[jtmcinder]

Both the +35 and the +43 will work with those tires.

- Jtoby

 

[focusedrage]

wow, thats the excat same set up im looking at... except what about 235 or 245 /45s?

 

[IMMORTALSPYDER]

someone on here is running 245/40/17 with a +42 offset, can't remember who

 

[TurboSpoolinIns]

While on the topic, anyone know if a +25 offset will clear a 1g small caliper ? It would allow me to run a "deeper" dish'd wheel and still be wide and functional.

 

[4wd-Eclipse]

Check this, I hope it'll help
http://toy4two.home.mindspring.com/offset.html

 

[farey34]

Originally posted by 4wd-Eclipse
Check this, I hope it'll help
http://toy4two.home.mindspring.com/offset.html

 

[farey34]

Damn I hate dial up! Sorry for the post above! 245/40/18 35mm offset Perfect fit!

 

[fidke]

Hey those are the same rims I got!
I got them in +43 and the rears come really close to the trailing arms. There's about 2mm of space so I ended up running a thin 3mm spacer in the rear just to be safe. I have a 1g btw, and I'm running 235/40 A032Rs on these rims (track rims). If I could buy them all over again, I think I'd go with a +35. But who knows, if I'd got the +35 you'd probably hear me bitching about how the tires stick out instead of bitching about spacers now . j/k ... I think +35 should be fine. +43 is pretty flush so +35 shouldnt stick out much (if at all). If you do end up getting them in +35, let me know how it goes. Maybe I can sell these and get +35 instead so I dont have to run spacers.

 

[g0tEclipseD]

Today I got my 17x8 5zigen fno1rc's

They rub against the struts in the front but there is about <1cm space in between when strait.


Im on ES100's 225/45/17R

There supposed to be 43+ mm offset but I have a suspision that they are 48+ and they made a mistake, Im calling them tomorrow to find out

If these arent 48 mm and actually 43+ offset, What can I do?

They also said I need to get a "Camber Kit" for my all 4 corners. Any ideas what this is?

Thanks

PICS:
http://fiberopticz.net/gst/rims/129_2979.JPG
http://fiberopticz.net/gst/rims/129_2974.JPG
http://fiberopticz.net/gst/rims/129_2975.JPG
http://fiberopticz.net/gst/rims/129_2976.JPG
http://fiberopticz.net/gst/rims/129_2977.JPG
http://fiberopticz.net/gst/rims/129_2978.JPG

 

[EuroGSTSpyder]

camber kit is someparts that make your wheels alignment in specs.You can adjust camber angel with them.Search for camber kit on ebay or on a board and you will find out

Check here(never mind pricing and stuff..just for info):

http://www.machv.com/froncamad.html