fp3052 at the track

BrokenTsi · 03-22-2007, 01:10 PM

Here is a run last year on the fp3052 (sold). I found out later that week I had a huge crack in my intercooler because I couldn't get anything more then 26psi.

MAF-T v1.3, keydiver stage 3, no safc

With dsm link, I could probably squeeze out some 11.40's. I did trap 123 that day however with a 3" crack on my end tank.

For those interested in the 3052.....it spools really fast.......makes awesome pump gas power.....and has pretty good top end.

http://media.putfile.com/11-sec-club

sherloc123 · 03-22-2007, 04:45 PM

wow nice run...lebannon valley is only a half hour from my house..let me know if your going there again this summer

BrokenTsi · 03-22-2007, 05:04 PM

Yeah. LBV is about 3 hrs from my house, but its worth the trip because our local track is NEVER open for test and tune. The first and only test and tune is scheduled april 15th.....

mitsuclipsegsx · 03-22-2007, 06:40 PM

yea its about an hr from me, ill be there

Evo8MRdude · 05-31-2008, 11:10 PM

That is a excellent time. I managed a 11.63@119.33 at 3100ft elevation with the same turbo. Sea level conversion would put me like at 11.2-11.3 and around 123-124mph

Chicken Patty · 06-01-2008, 11:10 AM

nice run

c_king333 · 06-01-2008, 01:36 PM

Did you guys running 11's on the 3052 ever get any dyno number's with that setup?

BrokenTsi · 06-01-2008, 02:48 PM

nope.

Slippi84 · 06-02-2008, 09:51 AM

Where these race gas or pump gas trips to the track?

BrokenTsi · 06-03-2008, 12:19 AM

These runs were garbage. All I was using to tune was a maft v1.3 and keydiver chip. I didnt even have dsm link. I just poured in a 50/50 pump gas/race gas mix and turned up the boost. for some reason, I could NOT get over 25psi because I had a huge crack in my intercooler that I found later when I went home. I would have ran 30+psi if I could. I just cranked the boost, turned the maft a few clicks back and drove it.

coltdie · 06-23-2008, 05:50 PM

Nice!! I having a colt turbo hatch 92 with an FP3052 setup and all the kit Fp who come with! This turbo is completly insane...its the better turbo drag/street I ever had!

2 weeks ago at 26psi, full Q16( new VP gaz) and settings in my dsmlink more safe than streets settings on pump gaz I ran 11,09 at 132,6mph. I really love this turbo, but now the problem for me is the traction and I can't have bigger slick than my 24,5

So for the moment I put less timing at each run I do for less spinning and more traction.

So this turbo is incredible. With the complet fp3052 setup fo FP in a 1g or 2g full weigth all in the floor you can run 10sec high!

coltdie · 07-28-2008, 09:52 AM

10,99@132,8mph now with ### timing!

I'll be here at the DSM shootout 16-17th aout to do somes 10s mid pass and 140mph with real timing and real traction