Tranny ISSUES! TC? DIFF?

[HyperFlex03]

Okay, just got done putting a tranny in my car, got a 5 puck ceramic clutch, and resurfaced the flywheel. All the general stuff while you put a new tranny in.....No heres the problem.....

SYMPTOMS:

-Clutch slips when I BARELY GO
-Make's a very bad sound almost like i'm in reverse
-Shakes like a MINX

Now, I took my car to a shop, and they took a peak at it, and it turns out that my tranny is like 1/4 - 1/2 an inch away from the engine. So obviously its not flush like it should be. Could this be why my car is being ###? ALSO I just did change the transfer case and it really didnt do a thing. Now It just sat in a garage, got the stuff changed, and was pulled out. I'm getting very angry and I don't know what do to! PLEASE HELP! My thoughts are that the transfer case doesn't have the viscous all the way in....but that's my theory, I dont think anything's broken....like a diff....could i tell? Any help is appreciated!

 

[pneumo]

it sounds to me like the shop already found the problem.

 

[HyperFlex03]

Now if we put the tranny all the way on and make if flush, and its still have'n problems....i know its not the transfer case cuz thats brand new....where else would it be? The sound was coming from the T-Case/where the viscous went in, so i just hink it needs a push and a shove all the wya in....but what else could i be looking at? I'll update tommorrow where i stand, thanks

 

[Spln_Hrd]

you should have never got a new transfer case
you should have done the clutch yourself
you should fok someone at that shop up
you should make them pull the trans out and fix that shiat right away
you should not pay those fokers any extra
you should be PISSED OFF LIKE A MOTHER FOKER