unique axle problem

[turbizzle]

well first off im trying to finish a build up of a 94 plymouth laser 2wd. Literally all that i have left is to find an axle for my car and i can start driving it. Now the problem im having is i cant seem to find an axle that fits my diff and is the right length. it all started out as just a torn boot and i was going to replace the whole thing, trip to the parts store later and i had my axle. but unfortunately is was the wrong spline count and the parts store had already sent off my old axle. i checked my drivers side to find out it was a 27 spline diff side and 25 on the hub. just for kicks and giggles i stuck it in the passenger side to make sure that it would spline up and a 27 spline is what i needed. ive tried 7 different axles now and the closest i could get to finding was about a half of an inch to long. so i was wondering if anyone had any insight. im pretty certain by now that it has a different diff and im trying to find an alternative to the 400 dollar drive shaft shop axle. i tryed frankensteining my own axle but the ends wouldnt fit. so if you have any advice or have been through this trouble please help . unfortunately i dont get access to the internet often so if you could text me at 509-952-7458 id apprecciate it. if not i just have to wait for a solution

 

[donniekak]

Is there a vin on the transmission bell housing?

 

[turbizzle]

there is but it matches the dsm tag on the firewall, and the parts guy from mitsubishi says that wont aid him in finding me the right axle

 

[donniekak]

Pm me with the vin, i'll run it thriugh caps and see what part number comes up. I can't believe the dealer didn't want the vin for parts.

 

[turbizzle]

thank you for your offer, but i finally found an axle. believe it or not the axle that ended up being right was listed in the book as being to long and the wrong spline count