Switching splines?

[VisionPaintball]

I am thinking of buying a tranny that has a 22 spline output shaft and mine uses a 23.What would be involved to switch a 22 spline tranny over to a 23?

Thanks

 

[VisionPaintball]

http://www.dsmtuners.com/forums/showthread.php?t=213508&highlight=splines


I think I found my answer. Any more thoughts?

 

[Elvenhome21]

being an awd don't you have that goofy cv shaft on the left side with the jack shaft.
Also make sure the clutch/flywheel diameter is the same, but cv shafts you can pick up new for like $40 a piece at Autozone if not another DSM guy

 

[Savage Talon]

Well my 91 came with a 22 spline shaft, you need to make sure it's not a 90 trans. Then pop the end case off and that will expose the VC and output shaft. Just swap out the output shaft and put it back together. It really is a piece of cake. Just make sure you don't loose the little ball that holds it in place. I had to do it when I bought a 23 spline trans for my 91.

 

[VisionPaintball]

I know the trans I was looking at was a 22 spline. How do I know if its a 91 and not a 90?
What is wrong with the 90's?
Thanks for all the info.

 

[Savage Talon]

The 90's have diffrent shifters, cables, and shifting brackets on the trans itself.
http://www.dsmtuners.com/forums/showthread.php?t=244022

 

[VisionPaintball]

Savage- If it is a 90 should I stay away from it,. Are there any detailed instructions to switch from a 22 to a 23?