Next performance mod?

[FourG63 97GST]

I wanna know what mod I should do next besides gettin a bigger turbo(cant afford that right now)

So far I have a filter
3"Apexi dunk catback, downpipe and testpipe
david brode upper intercooler piping w/ 1G bov
and the free mods, BSC ect.
I know I need a MBC and turn up my boost. but then what?

oh and whats your next mod gonna be?

 

[CBgst]

Well there are few ways you can go from here. You could do an evo o2 housing or have yours ported. I'd go with evo if you can afford it. You also could start on your feul system upgrades if you plan on gaetting a bigger turbo( pump, injectors, afc , afpr if needed). you can upgrade your intercooler but that about as much as a turbo. You can port your existing turbo. I ported my t-25 and it made a difference. It spools faster and pulls a LITTLE harder on the top end. Cheap mods would be to do the porting and do it yourself it's not that hard. Oh yea when you port the turbo port the exhaust mani to. The porting really helps cuz the t-25 needs all the help it can get. Do you want to get it ready for another turbo or do some go fast mods. Oh yea get a boost guage first then do the boost controller.

 

[Violater101]

Have you bought any gauges yet? That's not really going to help your peformance, but help monitor your vitals. An EGT is always nice as is a Turbo Timer so you don't have to turbo time it yourself. I think for the peformance side and bang for the buck I would get like a Dejon Tools intake. That's like around 130 bucks or so. You could also upgrade to a 1G 91 Plus turbo TB. They usually go for around 50 to 60 bucks...you don't need the sensors cause your's will work.

Later

 

[FourG63 97GST]

I bought a gauge today(Ractive EL), after I ran the hose and everything and ready to pod it in the pillar, I notice the needle is on -2 instead of being on zero. I'm returning it 2morrow. and get the autometer if possible.wanted to get the Autometer but these go up to 30psi and the autometer went to 20psi. When I can my afford a Big16G and run over 20psi. new gauges wouldn't be a problem.

 

[Violater101]

You can get summit gauges that read 30PSI ..summit carries them for a respectable price with free shipping and usually same day.

www.summitracing.com
only like 45 bucks for an autometer gauge

 

[FourG63 97GST]

so porting is my only other option huh?

 

[Ludachris]

It looks like you haven't browsed the site much - there's a whole section dedicated to your question:
http://www.dsmtuners.com/tuning-guide/2gturbo/