head install on block

[liquordrunk]

I was wonderin that when i install the head on the block is there ne thing special that i need to do besides settin the cams? and the HG
already sayin the block is at TDC how should the head be SET?

 

[BrokenTsi]

the timing marks on the teeth of the cam gears should be facing each other.

 

[BoostedTalonTS]

the timing marks on the teeth of the cam gears should be facing each other.

...And the cam pins should be ad 12 o'clock (since there are a total of 4 cam timing marks, 2 on each cam gear). The inner cam timing marks should be at 3 o'clock (intake cam) and 9 o'clock (exhaust cam). -These are the marks that you need to be 100% aligned on... Even though one is market at half a tooth, the inner marks need to be visually aligned with the head/valve cover surface. Don't worry about the outer cam marks as all 4 marks will not line up.

Good Luck!

 

[liquordrunk]

thanks guys preciate the help i see exactly what yall are sayin