gs-gst part 4

Posted 09-16-2009 at 01:51 PM by projecteclipse2

I ordered my pistons and I got a turbo header and two turbos for like 100 bucks a 16g and a tdo5 the 16g is an ebay turbo but will last till the td05 is rebuilt but the turbo is brand new good but the tdo5 needs to be rebuilt.

Here are some pics.
I will have some pics of my torn down motor tonight or tomorow

turbo pics:

Posted in Uncategorized

Views 842 Comments 14

« Prev Main Next »

Total Comments 14

Comments

	Neither of those are ebay turbos. Not knock offs that is, they may have been bought on ebay. The 2nd pic is of a stock t25 off of a 2g I believe (def not a 16g). The 1st one looks like a 14b. Edit: 1st turbo is some type of 16g. Part # will help you determine which one.
	Posted 09-16-2009 at 02:39 PM by 1stGenTSi

	isnt a tdo5 a 16g?
	Posted 09-16-2009 at 02:51 PM by projecteclipse2

	TD05H is just the compressor housing, both the 14b and the 16g are TD05H turbos.
	Posted 09-16-2009 at 03:49 PM by juanpac0

	^^^^ True story. That is definately not a 14b though, it looks like a small 16g, or possibly a Big16g. The numbers on the compressor housing can help you identify it.
	Posted 09-16-2009 at 05:48 PM by 92 GSR-4

	if i wanted to sell one of them how much can i get for the second turbo because if you saw it in person its like brandnew?
	Posted 09-16-2009 at 06:51 PM by projecteclipse2

	The numbers read S 001110012 49178-05200
	Posted 09-16-2009 at 07:00 PM by projecteclipse2

	49178-05200 is the part number for a Small 16g turbo, definitely not an ebay turbo.
	Posted 09-16-2009 at 07:16 PM by talontd92tsi

	its spins freely so it may not need to be rebuilt the compressor housing and turbine housing are loose
	Posted 09-16-2009 at 07:21 PM by projecteclipse2

	i will get the part number for the bottom turbo in a little bit
	Posted 09-16-2009 at 07:23 PM by projecteclipse2

	a/r 48 m10 1 or i im not sure and the stamp says yd 1430J mr1 87909 466 491-3003a
	Posted 09-16-2009 at 07:28 PM by projecteclipse2

	MR187909 is a stock 2g turbo, a T-25
	Posted 09-16-2009 at 07:32 PM by talontd92tsi

	thanks man i appreciate it
	Posted 09-16-2009 at 07:36 PM by projecteclipse2

	so would you guys say it was a hundred bucks well spent?
	Posted 09-16-2009 at 07:37 PM by projecteclipse2

	for both turbos.. Not each right?? You said the housings are loose on the 16g?? Thats weird if you have the c clip installed on the cold and the band clamp on the hot side..
	Posted 09-17-2009 at 04:11 AM by viperlp01