Car Work in Progress

Submit "Car Work in Progress" to StumbleUpon

Posted 02-17-2009 at 01:10 PM by Bluefire16

So im making a list of all the things i need to do, i keep forgetting the little things.

1) Fix control arm (under way)

2) Fix oil leak(s)

3) Install new valve cover

4) Put on new rims (Not till march)

5) Fix TCU

6) Fix interior panels

7) Install JL 6x9 speakers

8) Install evo 9 fuel pump w/ rewire

9) Port manifold and o2 housing/turbo

10) Repaint bumper and fender

The stuff i need to buy

1) Cat back exhaust

2) Downpipe

3) 550s or 650s

4) Safc to tune

5) Wideband

6) A fuel system

Thats all i can think of at the moment, will keep updated!

Posted in Uncategorized

Views 638 Comments 8

« Prev Main Next »

Total Comments 8

Comments

	Going to install speakers tomorrow and hopefully the tranny problem, as well as get the car CLEAN CLEAN CLEAN and ready for spring.
	Posted 02-17-2009 at 09:40 PM by Bluefire16

	Speakers installed, subs installed, car is cleaned but never clean enough, interior pieces are fixed as well. 3/10 so far!
	Posted 02-18-2009 at 05:01 PM by Bluefire16

	So after looking im not going to do the rewire on my fuel pump, just need to install....
	Posted 02-19-2009 at 10:41 AM by Bluefire16

	3 got some 750s if ya want. ill make a heck of a deal. . . .
	Posted 02-19-2009 at 11:40 AM by ed_dogg23

	4/10, control arm done
	Posted 02-20-2009 at 11:27 PM by Bluefire16

	Well found out that my transmission solenoids are bad (most likely ### i threw a p1750 code) so the cars going into the tranny shop to most likely fix the problem. And the oil leak might be the rear main seal so that will be fixed at the same time as well.
	Posted 02-26-2009 at 11:50 AM by Bluefire16

	7/10 and the new fender should be coming in a day or 2, so 8/10. And my turbo blew so i got a 16g, i just need to port my extra o2 i have laying around.
	Posted 04-06-2009 at 08:22 PM by Bluefire16

	Thought the TCU was fixed its not, so forget that...fuel pump goes in sunday? Porting the o2 i have soon as i borrow a dremel. Cut the cat yesterday....slowly its coming along
	Posted 07-31-2009 at 07:44 AM by Bluefire16