Blog Title: DSM Cocktail project
Firstly let me introduce myself.
My name is Leo and I live in Sofia, Bulgaria (Europe).
I have been building my car since 1997 and so far the car looks like this:
A 99 GS (euro spec - 141hp 4G63) with 97 GSX drivetrain and 91 6-bolt, 1G engine wiring harness and 1G eprom ECU.
This week I start my engine build after almost a year of gathering parts. My goals are to make it around 500 crank hp, but everything over 400 crank hp will be success. Here in Bulgaria we don't have a good gas. The best one is 100 octane which is something like your 93 octane gas.
I hope this project will be interesting for you and make you comment/help me out.
My name is Leo and I live in Sofia, Bulgaria (Europe).
I have been building my car since 1997 and so far the car looks like this:
A 99 GS (euro spec - 141hp 4G63) with 97 GSX drivetrain and 91 6-bolt, 1G engine wiring harness and 1G eprom ECU.
This week I start my engine build after almost a year of gathering parts. My goals are to make it around 500 crank hp, but everything over 400 crank hp will be success. Here in Bulgaria we don't have a good gas. The best one is 100 octane which is something like your 93 octane gas.
I hope this project will be interesting for you and make you comment/help me out.
She lives again! SD + Jackal works
Posted 02-06-2011 at 12:12 PM by AlphaVision
So after exactly 1 year I heard the voice of my baby again! Oh, I've missed it.
The past 3 weeks I was busy fixing small stuff like wires, hoses, clamps, leaks...well getting her ready for the first ignition.
Today was pretty adventurous. A dead battery, leaking turbo water feed pipe, cracked oil cooler, unplugged ECU connector and stuff like that just made it more dramatic.
But after all it started right away like it was turned off 1 hour ago. It runs rich, fuel pressure is little low (have to adjust the AFPR), has 2 know boost leaks on BISS and ISC and possibly many unknown
There is a lot of stuff to be put back on the car and to be tuned so I guess it will be a month until she will leave the garage!
So here is the video to share my joy.
YouTube - First start after engine build, DSM sped density setup
The past 3 weeks I was busy fixing small stuff like wires, hoses, clamps, leaks...well getting her ready for the first ignition.
Today was pretty adventurous. A dead battery, leaking turbo water feed pipe, cracked oil cooler, unplugged ECU connector and stuff like that just made it more dramatic.
But after all it started right away like it was turned off 1 hour ago. It runs rich, fuel pressure is little low (have to adjust the AFPR), has 2 know boost leaks on BISS and ISC and possibly many unknown
There is a lot of stuff to be put back on the car and to be tuned so I guess it will be a month until she will leave the garage!
So here is the video to share my joy.
YouTube - First start after engine build, DSM sped density setup
Total Comments 1
Comments
-
youtube vid isnt in english lolPosted 02-15-2011 at 11:19 AM by 907dsm
