1g turbo FWD Clutch/flywheel install(or swap)

[laserspeeddemon]

Thats it, install you're new or resurfaced old flywheel and go backward back up the tech article to reinstall everything you took out.

Good job!

[laserspeeddemon]

EXTRA HELP!

When every possible, put the bolts back where the came from, this helps keep track of what goes where. Here you see my putting the bolts in after removing the shifter cables. You can do this with alot of the bolts. Its an easy tip, and its makes things less complicated. Its harder to find which bolt you need when you got 50-sum bolts laying on the table.

[laserspeeddemon]

After removing an axle replace the install the hub back to its orginal postion and put a bolt/screw driver through the hole, like I did here. This places less strain on the brake line, to much stress will affect braking performance.