- T3??
- 420a ignition problem
- Timing
- Need flange scans for watercutter
- Turbo kit options
- SFMU fuel pressure too high
- Just finished engine
- Borg Warner turbos
- Turbo Kit advice
- Boosted 420a head gasket ?
- Turbo opinion and streetability??
- Deltagate Wastegate Mark II Springs
- 420-a not starting
- 98 Eclipse N/T (w/turbo) help
- 2g Fmic ?
- Forced Air Reasearch??
- fuel pressure is creeping up and staying there...
- Need help here
- Oil feed location?
- turbo boost....
- Won't let me past 4k in 4th gear..
- Which wastegate to use?
- GT30R Turbo 420a
- Log manifolds with big turbos?
- Turbo Grind Cams
- Walbro install problems
- Star manifold stud length
- Head Flange question
- OBx gt35r??
- [RESOLVED] Bolt sizes?
- tear down/ build up
- What internals to make 350 HP daily driver?
- I'm finally joining the turbo club!
- Cheapset most efficient way to turbo a 420a ????
- 420a head on SRT4 block
- Internal Wastegate Mod
- manifold absolute pressure CEL code #106
- 420a stock head bolts???
- Check out the new intake
- Need your Opinion. (about my planned setup)
- Does anyone have this turbo kit???
- Piston ring end gap
- Portfueler and Bogging issues
- 22psi dyno results
- Vacuum sources for the 420A
- do i need a missing link?
- please help me get my boost back:(
- Temporary fuel set-up
- Fmic flow/filter?
- Sound Clip: My New Blow Off Valve
- She lives again.
- Bigger turbo stage 2 option???
- na no more
- turbo size build up
- 420a Spray or boost??
- MAP sensor with portfueler
- Fuel pressure questions
- Time to pick a new turbo
- My Project's Progress:
- Boost Controller
- Blow off Valve
- Started my install
- revolutions good or bad
- Been waiting a while to ask these questions
- Alternatives to Log-style Manifolds (including Ajax's Manifold)
- Oil Feed Line Question....
- 420A Intercooler Piping???
- Finally got the Hahn kit.
- e-bay turbo
- 420A same as neon R/T 2.0L ?
- Will I blow my motor??
- Turbo Upgrade Or Downgrade???
- turbo seals
- Pics of my car/ build
- OBX fuel rail injector and intake setup?
- T3/T4 Exhaust housing question.
- Wastegate Problems
- Best Turbo
- [RESOLVED] Need help identifying the turbo flange
- EGT Temps..
- Leaking turbo oil fittings...
- Feedback line
- Turbo Kit questions
- Pics of my setup
- It's turbo time!
- New Setup Going In, Ohhhh Yeah
- t3/t04b on 420
- No boost problem and car running weird
- tuning my newly rebuilt 420 aftermarket turbo motor
- Turbo Oil Feed
- Cold air box design for turbo NT's
- Manifold & Down Pipe
- Which pistons for my setup?
- offical cooking pot style heat shield thread
- Custom turbo/heat shield
- Hahn turbo soundclips
- Oil cooler question.
- running rich at idle
- I'm ecstatic. More stuttering of course..
- SFMU Bleed valve prob.
- Internal--->external Wastegate options..
- couple of pics that I have taken from building my engine
- Terrible Hesitation/Stutter
- obx tubular manifold
- Car shuts off while driving
- Need help again...
- New Parts: AutoSquare Manifold & XSPower Wastegate
- Am I Not Turbo Enough For The Turbo Club?
- Just installed XSPower Evo8/9 IC Pipes!
- Finally.
- Boost leak test, air coming from cylinder
- what i need to build my engine for 25psi boost
- SFMU question
- Oil Leaking and another potential problem
- Ideal Vaccuum hose..
- Ebay Garrett?
- Part suggestions
- what psi were you runnin when your stock engine blew?
- Junkyard T3 turbo car donor list?
- Fuel Cut Defender?
- Trouble code P0108
- Just Recieved EBAY Manifold!!! MUST READ!
- just got back from the track!!
- re-update on 420a
- hahn stage 2 fuel pressure and turnin up the boost
- 6 bolt into a 420A car.
- Manifold Advice...
- Compressor surge?
- Manifold and Oil Pan
- NA-T Assistance
- needing Turbo Oil Feed Photos...
- Update on 420At
- My little FPBT28 420A Turbo project
- Car runs lean under boost :(
- All but done
- Corbin's injector bungs broke on me =(
- hahn manifold question
- Is my FMU alright?
- 420a 60mm Throttle body
- 420a Turbo Timer
- Pre Turbo ?
- 3" Cat Converter
- Cooling System Problem
- greddy electronic boost controller help
- SFMU Fuel system help
- OMG...the luck continues!
- My Turbo Buildup
- 12psi 420a?
- No oil pressure?
- Car Bucking, Turbo Spiking... **HELP***
- Not Building Boost *HELP*
- a588 turbo manifold questions
- overheating
- 95 fuel setup- FMU HELP
- HELP ASAP need turbo and cooling info...
- why can i not get 20psi!!!
- No Air/Fuel Gauge
- Turbo Install Issues - Fuel pressure too high??? Please Help...
- 12:1 FMU on '95, do I need to unhook stock FPR?
- High fuel pressure problem, Need help!
- Turbo Question
- Installing Turbo- Downpipe and manifold PITA!!!
- Which Turbo
- dyno time
- What turbo are most of you rebuilt guys using?
- Would this work?
- Super slow idle...
- wastegate
- Plug Gap
- 3"----> 2.5" Downpipe
- Does anybody have a portfueler map
- Finally, Build time!
- retard timing or no?
- Gaskets and ARP kit
- Difference in wastegate applications
- Mounting FMIC
- PortFueler Questions... (PrePurchace Questions)
- Treadstone Turbo Kit
- Finally Pics!!!
- Piping Size?!
- BOV location
- exhaust manifold
- FMU help
- fmu
- piping
- spark plugs
- Dyno time today?
- Turbo Flange and Identification
- Pt Cruiser Top End ??
- Idle using forged pistons Vs stock ones…
- Install Accessories, etc...
- Check out HRC FMIC Sale
- Portfueler install hindsight
- Vacuum lines...which ones can I get rid of?
- machine work
- Well guess i'm getting boosted
- What do you guys think of these manifolds?
- Star Stage 2 Kit???
- low compression
- No Way This is Normal
- Portfueler and now misfireing
- 14B turbo
- Oil
- Pictures found of an evo 4-8 swap.
- how do i install this porfuler
- walbro and hahn kit
- engine bolt kit
- ok another compare these turbos thread
- Downpipes NEED FLEX SECTIONS
- Should I Turbo????????
- turboing auto tranny
- Hooray for the new 420a threat setup
- Best Turbo'd pics
- Where can I get Star Turbo Manifold
- How a turbo works
- Turbo Choices?
- GS to GST! What parts?
- Updates with lots of Pics
- so whats the most i can get?
- Any turbo 2gnt's running meth?
- GSgoingFast Turbo Manifold
- Need help finding performance axles
- Turbo Specialties/Star Performance
- Highest Milage 420A Thats Been Turboed
- FMIC piping
- need turbo conversion info
- which pistons
- Thinking of boosting....
- Walbro 190 needed on this system?
- How much boost blew your clutch thread.
- Engine bay pics after install (NOT PURDY)
- Oil Feed Fitting
- PT Lifters and Rockers
- Post Your Manifold Thread...
- SFMU Vacuum Source
- How long for howell bottom end kit?
- Naws!!!!!
- need oil cooler?
- head parts
- ?? about Hahn off rode pipe
- Need help Im hitting 15psi but fuel prob
- oil return tap
- What do I need for 20 psi?
- 8 injector fuel system
- I need help again after installing my 440's
- Is this right about my fuel and boost
- help with sfmu peices
- fuel filter
- A/F Gauge Install
- GT30R & tune or Megasquirt!!!