Products the DSM crowd would like to see made

[1992awdlaser]

Originally Posted by skyrone

id like to see a 1g lift kit!!

Get coilovers.

[mylevi08]

i;d like to see a fiberglass or cf dash for a 2g and possibly a 1 piece front end for a 2g I know alot of guys who would buy it.

[loser_635]

Originally Posted by greentrbo_95gst

We are working on a lot of the carbon fiber parts and some suspension products. Unfortuantely, this is all time consuming and once we have new products on hand we will be posting them up. We had a pretty large thread going on with the carbon fiber parts to be produced and right now we are in the process of finishing couple surprises for you guys. I don't want to spoil anything so I won't say what it is.

Hopefully its cheaper than TopShopCarbon's prices
Nice to know were getting new products. Thanks

[Jayvr4]

For you guys wanting these tubular control arms, he has a thread on gvr4.org. I bought a full set from him and they are nice! I guess he answered our requests!

Here is a shortcut.


We need to get him on here!!http://www.galantvr4.org/img.php?id=69899


Here is a link. Pics on pg 5 of some Talon, not mine.
GalantVR-4.org: Soon to come... Tubular control arms & K members and more!

[daveyfx]

Originally Posted by D_Eclipse9916

Bolt on 5mph bumper support for those running large fmics.

Yes, yes, and YES!

[Morpherex]

STI's have them but we dont.
RallySportDirect.com - SuperPro 02-04 WRX/STi Steering Rack Bushings

Steering rack bushings?

[loser_635]

+1 for steering rack bushing
1st Gen and 2nd Gens ofcourse

[white_dsm]

I'd like to see a full 3" exhaust for a 1g awd similar to SSAutochromes prices.

[97droptopturbo]

not sure if this is already posted but a Roll bar for the spyders. that actually works! not just a light bar. thanks.

[03subie]

i wanna see faster ratio power steering racks for 1g
jumper harness for both 1g and 2g allowing wideband and afc to be connected without cutting factory harness
hinze joints on shifter cable ends
3inch intercooler piping for 1g awd
cast 2g manifolds with pieces thick enough to drill and tap without welding like evo manifolds
better water pipes for water pump for clearance on larger turbos
1g 4 inch exhaust
one piece headlights
license plate light lights that dont rot out
bolt in laptop stand for tuning
also carbon fiber everything

[TurboTJ]

• Taller 5th gear (more than 10%), I think TRE made them for a while but I can't seem to find them anymore
• Glove box gauge pod. We need a sleeper place for gauges!
• ash tray and cupholder switch pods. Replace the ash tray and cup holder with a place for switches
• +1 for any kind of ram air for a 2G

[1slow97]

Originally Posted by Car_guy_09

FWD traction bars

x2

[SanTa_]

So what's going on with this...? No feedback yet on what's going on.

[loser_635]

Originally Posted by SanTa_

So what's going on with this...? No feedback yet on what's going on.

+ A BILLION!

[PL69]

Originally Posted by loser_635

+1 for steering rack bushing
1st Gen and 2nd Gens ofcourse

X2 !!!

[typeR4life]

Originally Posted by 03subie

i wanna see faster ratio power steering racks for 1g
jumper harness for both 1g and 2g allowing wideband and afc to be connected without cutting factory harness
hinze joints on shifter cable ends
3inch intercooler piping for 1g awd
cast 2g manifolds with pieces thick enough to drill and tap without welding like evo manifolds
better water pipes for water pump for clearance on larger turbos
1g 4 inch exhaust
one piece headlights
license plate light lights that dont rot out
bolt in laptop stand for tuning
also carbon fiber everything

+1 on the steering rack
+1 on everything else

I wanna see a 4g63 divided t3 manifold that costs less than my car.

[king_of_HTX]

^^ Gotta pay to play.

[TSIfreek]

Any possibility a vendor can start making up the rear toe elimintor kits for the AWD 1g again?

[1992awdlaser]

Originally Posted by TSIfreek

Any possibility a vendor can start making up the rear toe elimintor kits for the AWD 1g again?

How to eliminate the active rear toe, correct tie rod angle on lowered 1g awd

Post 18

[kqodprez]

I'd like to see the carbon fiber headliners back in production for both the 1g and 2g....at a reasonable cost of course. I also 2nd having some cool radiator mounts made. Hayame doesn't make them anymore...hell no one does. I'd be down for a set asap!

[Morpherex]

Originally Posted by TSIfreek

Any possibility a vendor can start making up the rear toe elimintor kits for the AWD 1g again?

Somebody did, But they want damn near 300 bux like DSS did. I know they can be made and sold for way cheaper than that. Who knows..
Won't stop me from buying it tho.

I'd like to see a bump steer eliminator kit.

[TuRBoTaLooN]

What about a vendor that just sells OEM parts, but EVERYTHING. Like interior trim, carpets, door panels, fendors, water pumps, suspension pieces, bushings, vacuum lines, clips, etc. I mean where does one go to re-do the interior of their car? E-bay? Junkyard?

[JWoodley]

I'd like a radiator cooling plate/ducting to help alleviate the summer heat/big fmic/big turbo woes.

[Evan K.]

Tubular suspension components for 2g FWD.

[Iroc_g]

Im all over a 2g diffuser. I actually had a local company lined up to develop them, but I couldn't afford it on my own. The 2g radiator cooling plate would be very nice. Im not sure why this hasn't been done yet, seeing there is a lot of room to improve the airflow there. These or any other carbon parts would be a huge plus.

gauge pods. Glove box is a good idea, but also radio area, center console, etc.. Id also love a pod for my avc-r / afc that goes anywhere but the center vent.

led taillights that aren't those cheap ebay things. Somthing with a full panel of led's. Somebody here made some for them selves, and they were sick.

Awesome thread... keep it going!

[Bones420]

Originally Posted by TuRBoTaLooN

What about a vendor that just sells OEM parts, but EVERYTHING. Like interior trim, carpets, door panels, fendors, water pumps, suspension pieces, bushings, vacuum lines, clips, etc. I mean where does one go to re-do the interior of their car? E-bay? Junkyard?

Search online, some dealerships offer OEM parts at "good guy" prices. This where i've found reasonable prices for what i was looking for.


Ricart Automotive - Mitsubishi Parts - Columbus, Ohio

[perks563]

I don't know if anyone is familiar with f-body cars (camaro/firebird) but they are also unibody like DSM's. What I would like to see made are subframe connectors/braces that will help stiffen the chassis.

[SleeperG]

2g CNC'd bushings to replace where the cross member bolts to the core support.


Spherical brearing End links for the 2g.


POLYURETHANE SUBFRAME BUSHINGS.

and power steering rack mounts

[Black99gst]

someone who has all black interior conversions for a good price would be nice

and +1 for the brackets to attach Evo Recaro's into the 1g/2g cars!!!

[SleeperG]

With so many guys being happy with the evo3 16g's

why hasn't anyone made a dsm manifold and o2 housing that will allow guys to run the evo 4-9 turbo's
with all the evo guys dumping their snails to upgrade.


or even the tommi mack 6.5 turbos.