The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

headlights

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Pegasus

Probationary Member
18
0
Jun 14, 2002
yo guys how do you get the headlights out of a 2g talon. my drivers side headlight is all fogged out and i want to clean it up, and maybe take out the orange reflectors for the turn signals. I cant figure out how to get them out though. thanks for any help, later.
 
what ya wanna do is pop the hood and on top of the headlight there should be screws
 
what you wanna do is take athe transmitter and contect it tothe engine mount battery line charger and then send that threw the second gas petal line adjuster to the third shift
 
When removing the headlights it is much easier to remove the front bumper as well, atleast on my 97 thats the case. There are about 5 bolts under the hood between the headlights, 6-7 on the bottom of the bumper, two that connect the fender to the bumper (must get to those through the wheel well) and finally you would need to remove the bumper support so the whole thing comes off. In order to do that you need to remove 4 rather large bolts from up under the car. You should see what I'm talking about once you get under there. Then to remove the lights all you need to do is remove the bolts on the top the ones on the side, near fender, and the one on the bottom which was behind the bumper. hope that helps
 
damn! are you sure its like that on a 95 too? how long did it take to do all that man?
 
huh? to clean my headlights i went to the drug store and bought some CLR and scrubbed them with a rough sponge, looks good now & i didnt have to take anything off
 
I would think so since the 97+ headlights can bolt right up to the 95-96 cars. It only took 30min to get to the headlights after I decided taking the bumper off was the way to go (had to install my projectors).

Ive also hear that if you wanna clean fogged headlights that you can just use toothpaste on the outside of them to clean them up a bit, but if you wanna take the orange out your gonna have to remove the headlights
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top