Got new MAS and still won't run

[Wesley98eclipse]

Alright other DSMers I'm frustrated with my car, it will start up but it takes a few cranks and a little gas,once it starts it revs extremely slow and wont get above 3k Rpms, if I don't give it gas it will just bog down and die with the MAS plugged in, WITHOUT it, it will idle but still won't rev up fast, so I replaced my MAS with a used one from Dsmgraveyard and it still does the same as the old one, I also have checked the timing and it was good, what else could it be? PLEASE HELP!!!!!!!!

 

[92AWDHX40]

Do you have any cel's. Why did you replace it, you said a new, then you got a used one. You mean
another one?

 

[Wesley98eclipse]

I do have cels but do not know how to check them and yes I meant I got another one. I read about my cars problems and most people said it's the MAS so I bought one from DsmGraveyard and it didn't change at all

 

[92AWDHX40]

Well you need a way to check your codes, take it to a shop, have codes pulled , so you arent spending money where you may not need to.

 

[Wesley98eclipse]

Well how many places can check obd1?

 

[92AWDHX40]

My shop here does before i got a logger, now i have link no problems, with seeing codes, its the best upgrade on my dsm.

 

[Wesley98eclipse]

If I had the money I would get link but thats probably too expensive for me right now, so you used a pocketlogger or something? what logger did youhave ?

 

[92AWDHX40]

I had mmcd and a palm pilot sold it, try ebay, took me a while to get link i just got it a few months ago.

 

[Wesley98eclipse]

Alright thanks