The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support ExtremePSI

Speed Density

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

streetstyleauto

Probationary Member
24
0
Feb 22, 2009
Fords, New_Jersey
im getting dsmlink v3

what do i need to run speed density

do i need to get
- SD bundle (MAP, IAT, pigtails and bung)
or
-sd cable

or maybe boTH

ALL FROM ECM TUNING

thanks
 
Last edited:
if you dont feel like wiring up the sensors yourself, get both. If you think you can tap into 4 wires from the ecu....get just the sensor bundle.
 
If you get just the bundle you will have to tap 4 wires but will also be able to get the majority of your ve table set up off of your maf. With the cable, it takes your maf out from the get go so you will have to start from scratch with the ve table. It really depends on what you would rather do, tap a few wires and have your ve table mostly set or dont tap any wires and start your ve from scratch.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top