The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Post a Question

Norcal shops

Please Support Rix Racing

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

littleman

Probationary Member
2
0
Dec 22, 2003
bay area, California
hi all

im from the bay area and just picked up a 2g tsi awd and was wondering what are some dsm shops in the area

i've only ran across fftec on the forums so far

are there any local junkyard that has dsms thats close by so i don't have to go up to sac?

just want to buy a jpipe so i can get the 14b on without havin to order online and have it shipped

thanks a bunch
 
As far as a shop to go to, there's nothing better than FFTEC. Dig around a bit and you'll notice all the high horsepower DSMs and EVOs come out of FFTEC.

As for a junkyard, nearly all the Pick n Pulls have DSMs. Rarely do they have 2g's though. What are you looking for, I know I got a bunch of spare DSM crap laying around..haha. Anyone need 3-4 transmissions?
 
93_tsi_fwd - do u know if ## 1g at the pick n pull still have stock bov and the jpipe to smic

T9S1i - j-pipe to stock smic, licp or anything else to make a 14b on 2g install go easier

unlmtdndeavor - basically looking for stock 1g jpipe, or one that can connect a 14b on my 2g to the stock smic, as long as i have something or a flange that can bolt onto the turbo i guess i can have the rest of the pipe fabricated, could also use a new jpipe/turbo gasket, still lookin for a boost gauge/good stock or koni shocks/rims also if you have that=p

thanks for all the help guys!
 
I have a Bushur Racing j-pipe. It was the largest diameter one you could buy, same length as the stock one, so you'd still need to build something to adapt it to your intercooler piping. My advice, call up FFTEC and buy one of their j-pipes. I have a boost gauge too. An autometer -20/30psi black face. PM me if you want it.
 
KBR Performance Tuning in Vallejo also works on DSM's & EVO's :thumb:

you should check em out as well.



aite, peace.
 
I have a sweet cast aluminum J-pipe for use with the stock SMIC. PM me if you want it.
 
How's it going guys, I'm a new owner of a DSM [95 GSX]. Where is this FFTEC located?
 
for the DSM'ers from the North bay, East bay and Sac, you should check out KBR Performance Tuning in Vallejo. the cars out there are not too bad at all.

You must be logged in to view this image or video.



aite, peace.
 

Attachments

You must be registered for see attachments list
Vallejo eh? That's like 5 minutes from here. Where is it located?
 
I'll have to check out the shop some time.. I'm still new at all this DSM stuff.
 
RedTurboEclipse said:
whats the highest powered 4g63 that has come out of your shop?
Click to expand...


are you talking to me??

well, the highest was only 687 whp / 660 wtq
You must be logged in to view this image or video.


You must be logged in to view this image or video.



ask gixxerdrew, I built and sponsor his car.




aite, peace.
 

Attachments

You must be registered for see attachments list
Isn't that Gixxer's car that runs land speed tests. I noticed his car in one of KBR's earlier posts.
 
Hey KBR,
can you modify my 1gen DSM ICs to fit my 3000GT?
If so, how much?

I can bring the stock ICs from 3000GT for design matching if needed.

Michael
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Boosted Fabrication
ECM Tuning
ExtremePSI
FIBA Motorsport
Fuel Injector Clinic
Innovation Products
Jacks Transmissions
JNZ Tuning
Kiggly Racing
Morrison Fabrications
Rix Racing
RockAuto
STM Tuned
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top