The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Post a Question

tri cities?

Please Support ExtremePSI

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

marsh63

marsh63

15+ Year Contributor
517
0
Oct 15, 2007
richland, Washington
where have all the dsms gone?

i have only had contact with one other dsmer in the tc.

anyone interested in starting up a meet here soon?

like my car looks pretty bad right now cause of all the body work im doing but yeah i want to see where all of the tc dsmers went
 
Well two of us are in the garage for the winter. Transmission is pulled from mine and Bones can't seem to keep a starter in his without burning it up.
 
I will be a member shortly, Im debating between gs-t in pasco or poulsbo. hmmm, decisions decisions. They both are very simular but the one in poulsbo has a 6bolt/ 60k rebuild motor.
 
I'd be interested in something! I'll be moving to Richland come December this year. She'll be parked all winter till the weather gets nice in the Spring! But I'd love to get involved with some fellow DSM-ers around. :thumb:
 
marsh63 said:
yeah i was wondering where you two went. hey did you call me the other day?
Click to expand...

Yeah Bones called for me, we were looking for a impact gun. Been trying to get the flywheel off my car and have tried 3 different impact guns but none of them seem to have enough torque to get the bolts off.
 
droppinbottom said:
Yeah Bones called for me, we were looking for a impact gun. Been trying to get the flywheel off my car and have tried 3 different impact guns but none of them seem to have enough torque to get the bolts off.
Click to expand...

you guys get it off yet? i have a 600 ft lbs impact. but yeah if you guys need anythin else just give me a call.
 
this is djordan97 on another locals profile. I am still around and I can bring a couple of impacts plus a couple really big wrenches to help you get those flywheel bolts off if you guys need.
 
I have not gotten them off yet. Just not had the time to mess with it this week. I got the tranny and clutch off and it is over at EnglishRacing right now. I appreciate the offers for help. I borrowed a impact from a friend that has a rating of 600ft lbs reverse torque and it did not even budge the bolts.
 
droppinbottom said:
I have not gotten them off yet. Just not had the time to mess with it this week. I got the tranny and clutch off and it is over at EnglishRacing right now. I appreciate the offers for help. I borrowed a impact from a friend that has a rating of 600ft lbs reverse torque and it did not even budge the bolts.
Click to expand...

try locking the crankshaft and use a huge breaker bar. what psi is your air compressor set at? i run mine at about 110 psi for the impact
 
marsh63 said:
try locking the crankshaft and use a huge breaker bar. what psi is your air compressor set at? i run mine at about 110 psi for the impact
Click to expand...

Regulator caps out at about 135psi on mine. I don't have a breaker bar at the moment. That is one that list of "I need to remember to buy" next time I go out but I always seem to forget.
 
use a cutting torch. LOL jk

um i made a tool to lock my crank shaft so if u need it ill bring it to u. that was befor i had a impact. also ill bring over a breaker bar if you still need it.
 
I have a breaker bar that's 2 feet long plus my jack handle will fit on my breaker bar. if that won't break those bolts free then I doubt that anything will break em free
 
Anyone from tri-cities gonna throw any mini meets before the weather turns to total shxx. From Yaks and was thinking of driving down this weekend with a couple dsm's just to get out of town and see some new cars/peeps.
 
dunno we could this weekend. I will hopefully have mine back running this weekend.
 
My Talon is on the Dyno down at the shop and we will be starting to tune tomorrow. Hopedfully we will be able to make BOTI down in Woodburn on Friday and Saturday. So sorry, no meet for us...
 
baugh92talon said:
plus i need a pasenger to help tune my car in!!!!
Click to expand...

What engine management/setup are you on? Be happy to help out, that is if you need some help. Is there still a decent turnout of cars at Hastings. Its been a while since I have been to Kennewick to drive around at night.
 
fst91dsm said:
My Talon is on the Dyno down at the shop and we will be starting to tune tomorrow. Hopedfully we will be able to make BOTI down in Woodburn on Friday and Saturday. So sorry, no meet for us...
Click to expand...

The Woodburn event is a little diff than the norm. There schedule states sat. and sun. unlike the usuall fri. pro qualifying and sat. race day.
Schedule
 
yeah hastings still has a decent turnout. every friday and satur day from lik 9 till whatever happens on what people want to do.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Boosted Fabrication
ECM Tuning
ExtremePSI
FIBA Motorsport
Fuel Injector Clinic
Innovation Products
Jacks Transmissions
JNZ Tuning
Kiggly Racing
Morrison Fabrications
Rix Racing
RockAuto
STM Tuned
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top