The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Sept 7, 2008 Import arce at Maryland Internation Raceway

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I'm working hard trying to the '91 awd talon up and running on the hta88 turbo stock motor. had a few set backs with having a noneprom ecu when the previous owner said it was eprom. so i had to locate one. I found one in richmond that needs to be rebuilt but should be good to go after that. Got a New FMIC to go on the car along with needing to get some IC piping 2.5" made, have water lines for turbo ran. and then it'll be time to get it tuned.

Looking for low boost around 26-28psi and high boost depends on what the motor is looking like inside :)

Will hopefully be tuned by brad brooks also
 
I'm working hard trying to the '91 awd talon up and running on the hta88 turbo stock motor. had a few set backs with having a noneprom ecu when the previous owner said it was eprom. so i had to locate one. I found one in richmond that needs to be rebuilt but should be good to go after that. Got a New FMIC to go on the car along with needing to get some IC piping 2.5" made, have water lines for turbo ran. and then it'll be time to get it tuned.


So you need an eprom ecu? We have one for sale.

Sandra
:laser: :talon: :dsm:
 
well i found one in richmond, yeah i talked to the hubby about it last week. On a real budget until the national guard gets my pay straight ha. But i do plan on being there with the talon as long as the army doesn't find something for me to do last min.

Now to decide/figure out what class to run in.


No cage, no seats/harnesses, stock appearance/stock motor, hta88 turbo setup, 235/60/15 MT drag radial.
 
^
maya is your GF? anyways i'll be there either way. lots to finish on the talon.
 
Tempting, tempting. I probably will be doing the turbo swap that weekend unfortunately at the rate my parts are coming in. Does Maya have any sisters? :D
 
Tempting, tempting. I probably will be doing the turbo swap that weekend unfortunately at the rate my parts are coming in. Does Maya have any sisters? :D

Then come to just watch. Remember I came to the meet without my car. Itold you to come to the shoot out and you didn't listen to me, so you missed a great time. Don't make the same mistake again. I'll make you a deal. If you come I'll feed you.

Sandra
:laser: :talon: :dsm:
 
Then come to just watch. Remember I came to the meet without my car. Itold you to come to the shoot out and you didn't listen to me, so you missed a great time. Don't make the same mistake again. I'll make you a deal. If you come I'll feed you.

Sandra
:laser: :talon: :dsm:

LOL You know how to bargain. I really did want to attend the Shootout but I don't like driving 8 hours straight without at least some form of company to watch my back in case I get stuck. We'll see. If I'm not doing the swap that weekend then I'll come with the car and maybe a buddy or two.

One of my best friends recently suggested we should take a roadtrip somewhere and cause a ruckus.
 
LOL You know how to bargain. I really did want to attend the Shootout but I don't like driving 8 hours straight without at least some form of company to watch my back in case I get stuck. We'll see. If I'm not doing the swap that weekend then I'll come with the car and maybe a buddy or two.

One of my best friends recently suggested we should take a roadtrip somewhere and cause a ruckus.

Bring 1,2,or 3. The more the marrier. I'll feed as many as you bring.

Sandra
:laser: :talon: :dsm:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top