KC. MO Worlds of fun

[turboglenn]

Hey guys/gals, if anyone in KC area is going to be free i'm driving down tonight, staying in a hotel and going to worlds of fun in the AM, thne going back to the hotel for the night, just seeing if anyone wanted to meet up. I won't have "net acess, so call 402-850-3166 i should get in tonight in about 3 hours..... If anyone's posting on my account saying dumb shit please excuse, that's the guy house/dog sitting and he has a DSM and might get bored and come looking

Later
Glenn

 

[->PrOjEcTGS<-]

I get out of work at 10:30pm and plan on going to the gym till midnight. But, how late were you wanting to stay out? I could round up a few guys.

 

[turboglenn]

hey, i'm in a BAD spot, my crank pully came lose and shredded teh alt, AC and power steering belts. I've got limited tools but a tow truck driver let me use an impact to tighten the crank pulley. I desperately need belts and a few tools

12mm socket on 3/8th ratchet, and a 12 and 13mm stubby wrenched or just plain box wrenches if anyone has them. I'm stranded at the fairfield in right across from worlds of fun. it's a mariot hotel. anyone that can help pelase call me at 402-850-3166.. i will compenstate you for your time or any spare belts you have... I've been through 2 alt belts already until i just found teh issue.. thank gd the hotel has a "public pc" that i can post this from...

i'm ioff parvin road at the 48th street exit # 54 ........... the fate of my supposed "get away weekend" rests in your hands people, please help a brotha out!!!!!!!!

PLEASE BROTHERS I NEED HELP!!!!!!!!!!!!!!!!!!!!

 

[DiamondStarAwd]

I have a spare alt belt for a 1g car. Will that fit a 2g?

I can come up and install it for ya so you can make it back home, just no power steering.

 

[->PrOjEcTGS<-]

It's 2am here and I just got home. I will call you in the morning to see if you still need the help. I don't want to bother you if you are sleeping. Call me if you need to. I will be available till 4pm tomorrow: 913-406-3528 I've got both belts, an alternator, and a crank pulley if you need one. I was planning on heading up that way tomorrow to go to the junk yard anyway. I'll give you a ring around 9ish.

 

[turboglenn]

It's 2am here and I just got home. I will call you in the morning to see if you still need the help. I don't want to bother you if you are sleeping. Call me if you need to. I will be available till 4pm tomorrow: 913-406-3528 I've got both belts, an alternator, and a crank pulley if you need one. I was planning on heading up that way tomorrow to go to the junk yard anyway. I'll give you a ring around 9ish.

ProjectGS and DiamondstarAWD although i didn't get your offers till late, thanks for coming through, i was working on the car around 9 so i don't know how i didn't notice you tried calling, but i do much apreciate it either way. I saw the missed call when i checed the time from leaving WOF, I didn't get to use the computer to even know that was your number until just now. Next time i'm in KC the beers are on me either way

I found an O'reilly that had a driver willing to bring the parts to the hotel, but only after i had them look up my phone # in their system to prove i spend a few hundred a week at their omaha store on average for my car and customer cars maintenence. He first said he wouldn't send them to me because i wasn't at a shop and could rob or shoot his driver.

I had a 12 and 13 box wrench and a 1/4 ratchet with a 10mm socket on it in the car, those are all i had to change the belts but i did it But if it weren't for that tow truck driver that had an air powered impact on his truck to let me use to secure my crank pulley i would have had a bi*** of a time. Luckily the external wastegate is 12mm as well because with the dump pipe on it i can't get my hand to the tension bolt on the alt period.

I tried using his 1/2 ratchet on the crank pulley at first, but turning the motor backwards i don't like, plus i was rolling it while in gear and getting no where. The impact zipped it right on, i just hope there's nothing messed up with the woddruff key and that the timing mark is on since i didn't have the tools to check everything, so hopefully it didn't loose alignment with the key ( I also a fear if it was off alignment that the damper is now stuck on there until a savage removal beating may take place)

Eitehr way man, thanks a ton! We had a great day at WOF, stayed from 10:15 till 6PM and the weather couldn't have been much better

 

[->PrOjEcTGS<-]

^^ The true DSMer way ^^


Now I definitely need to put together another DSM track day @ KCIR!! Hope everything goes smooth for you on the way home. You have my number now if you need anything while you are in KC. Don't hesitate to call. I've got spare parts out the A$$. And if I don't have it I know a freind @ O'Reilly's that will get it. CHEAP! Good deal man!!

 

[turboglenn]

^^ The true DSMer way ^^


Now I definitely need to put together another DSM track day @ KCIR!! Hope everything goes smooth for you on the way home. You have my number now if you need anything while you are in KC. Don't hesitate to call. I've got spare parts out the A$$. And if I don't have it I know a freind @ O'Reilly's that will get it. CHEAP! Good deal man!!

I made it home smoothly and trouble free. checked the crank pulley this AM and it's right where it should be

thanks again for the inteneded/offered help.

I was just saying to my lady that i can't wait until you do another DSM track day so i can go back down and race. (gonna bring a lot of extras though )

 

[->PrOjEcTGS<-]

I made a trip up to council bluffs to work for a week, about 6 months ago, two weeks after putting my new engine in. I cringed at every sound I heard. I stopped every 30 minutes or so to check on things. Ended up making it there and back in one peice though.

 

[DiamondStarAwd]

Good stuff man

 

[bastarddsm]

I had a similar issue with mine, not as bad, but over time it beat the hell out of the keyway in the lower pulley and almost had the key sheared off. it had like 5 degrees of rotational freeplay. you might want to check that..

 

[turboglenn]

I had a similar issue with mine, not as bad, but over time it beat the hell out of the keyway in the lower pulley and almost had the key sheared off. it had like 5 degrees of rotational freeplay. you might want to check that..

Next time i pull a motor mount to where i can get the damper off i will check the keyway. But since the timing was dead on i imagine it's fine and won't pull it unless i've got another reason to be in there or it comes loose again. I will be keeping an eye on it. Running without balance shafts for a long period of time ( last motor didn't have them either ) I can say that i think that might have played a roll in the damper bolt (center one) coming loose. The BSE'd motors have made everything in my car rattle at one engine speed or another and it gets kinda annoying, but it's too late now and i'm not pulling the dash to fix a buzz at 1800 RPM, I'll just crank the radio