June 21st DSM MEET

[TiradoCC]

June 21st DSM MEET

Time: 1-7pm (BBQ) 7pm-track
Place: Across Rocky's shop, the address is:

5727 Old Seguin Rd.
Kirby, Texas 78219
----------------------------------------------------------------------------------
Last meet was fun, wooped some people at basketball . Next meet will be held on June 21st across from Rocky's shop, at a park. The BBQ will be from 1-7 pm and afterwards we will head out to the track for Midnight Madness.
Rocky will be providing brisket, but we will have to provide everything else....drinks, plates, forks, etc. Once everyone is there we can gather money and buy what we need......

You must be logged in to view this image or video.

 

[webconnect]

Be sure to come. So each of you can get your car individually pictured. For a super secret website! CT78155 knows.

 

[DSM_PWR]

sorry guys wont be able to make this meet

 

[gotboost8]

count me in

 

[c_king333]

Basketball? Carlos if I would have known this I would have came out there in the daily driver just to whip some ass. I should be at this next meet.

 

[TiradoCC]

Yea basketball was fun, I was on the winning end though .

Yea this next meet should be bad ass. I'm getting a couple of 3000gt's to go out there with us.
How is your car coming along?

 

[c_king333]

I'm just waiting on the "prototype" throttle body. And then its back to the dyno to finish what I started. And now that I know the guys who owns the shop where I dyno at pretty well I shouldn't have to wait forever to get a couple hours in.

 

[webconnect]

I got hustled by c-los

 

[TiradoCC]

Just like the Spurs are going to hustle the Los Angeles Kobe....woops I mean, the Los Angeles Lakers .

 

[mattdev]

I'm down... Just got my 18g in, IDK if I'll be running or not w/o a fmic or fuel uprgrades.

 

[Rotian]

We all had a good time. Too bad we couldn't make the Madness run, but it wan't in the cards. On a similar note; it seems the DSM itch has struck once again on this poor soul. It seems we are going to have another baby soon, A blue 91 GSX baby that is... I'll post more detail and some pix once it gets settled into the new grarge. I don't want to jinx it as I don't have the bill of sale as of yet. (p.s. I just got the acceptance news/offer and I'm excited. Gonna pick her up in a day or two after I gather the funds... )

 

[doroyce05]

i would try to go to this one since i've never been to any dsm meets. only thing holding me back is the fact that my car is not tuned at all. i just got my new ecu in (ds-map tunning ds-map.net). i would like to atleast have the car dialed in for daily driving so that i can attend these meets

 

[Rotian]

Woot! Bill Of Sale In Hand... Thanks To The Love And Support Of My Sweetie, We Now Have The Keys To A GSX!

You must be logged in to view this image or video.

Landed a 91' GSX Automatic, No ABS, 113K for $600. It's untouched by any mods, so it's going to be fun building from the ground up. We'll be keeping Lori, so it looks like we have another car for the meets. I'll get another thread started and post the pics once it gets washed and blow dried...

P.S. Hey Carlos... It Looks Like You'll Need To Stock Another Color Besides Red

 

[TiradoCC]

Woot! Bill Of Sale In Hand... Thanks To The Love And Support Of My Sweetie, We Now Have The Keys To A GSX!

You must be logged in to view this image or video.

Landed a 91' GSX Automatic, No ABS, 113K for $600. It's untouched by any mods, so it's going to be fun building from the ground up. We'll be keeping Lori, so it looks like we have another car for the meets. I'll get another thread started and post the pics once it gets washed and blow dried...

P.S. Hey Carlos... It Looks Like You'll Need To Stock Another Color Besides Red

Nice!!!! Not bad at all for $600.

I only stock a couple of popular colors, but I can get basically any color you are looking for.....there are some very nice colors out there. Also, now I can get color matching for people that are trying to match their valve cover to their car, or a certain part on their car

 

[DSR MITSUMAN]

Nice ) Was looking for t/case for pinky 600. for car used t/case 350-700 could have a whole car

 

[97SPYDER210]

way to go David. it was nice to meet you and lori at the last meet. are going to be there at this one? leave the gas eater at home this time. youll have to show me where to find deals like that.

 

[Rotian]

Well I circled the car like buzzard for almost 2 months. One day stopping to talk to the shop owner. The car had been taken into the shop due to it's non-running condition and wound up sitting for a very long time. Anyhoo, I left a number and an offer after having looked it over. 6 weeks later the shop owner called and said the offer was accepted. We paid the man and swooped the car up. It's safely tucked in the garage at the moment. This car is in exact orginal condition, seats are perfect (non-leather). And body in really good shape given it's age. Pop-ups work fine, windows and antenna work fine...

On the other hand... It is a DSM after all... Right?

Cylinder 3 shows very low compression. Adding oil brought the compression up slightly, an indicator of a valve issue. I don't have a descent compressor so couldn't do a leak down.

All fours are flat, some will hold air for a couple of days. Others won't. No big deal as it'll get some good rubber once it's road worthy. Rotors are rusted bad, and no brake fluid found in any of the break lines. I'll be ordering fresh rubber for all 4 calipers and a new master cylinder. Again no big deal, gotta stop sometime right?

It's not getting fuel or spark. Relays all look/test good. Fuel pump flows fine with a seperate power supply attached. We'll be working on this more in the comming days, just to get it turned over, and suspect the ECU as the root cause. I'm going to look up the VIN and Options to see if it came with the anti-theft option. It might help solve this cunundrum...

There is the simple skinny. Like I said in a previous post. I'll be starting a new thread with pix. It cleaned up very well, and will be road worthy soon. It's the name of the car that seems to be the hard part.... You all know how I love to name my cars

 

[mattdev]

Dude, that is a pretty nice steal...

Now my ride is down again... I got the 18g in clean, no leaks, broken in and all... then my clutch went out.

I went to get gas to start tuning, and I try to pull up the the pump and I can't get in gear. I figured it might be the POS ACT TOB (thats alot of acronyms), so I dropped the trans (my first time ever) and come to find out, my year old ACT 2600 is missing a finger. The missing finger was jammed between the Pressure Plate and Clutch Disk and luckily didn't go bouncing around.

So I called up ACT and I have to ship them the clutch to see if they will cover it. In the mean time I am waiting on my second 2600 and should get here next week.

Hopefully the install will go as smoothly as it came out (might need some expert help on the install).

 

[TiradoCC]

Install isn't too hard, it's getting that dam tranny to line up that's a pain in the ass!

 

[AutoExec]

I'm a newbie here, but I'm definitely would be happy to attend this meeting and see you guys. Please tell me what to bring to this meet

Some info about myself. Name - Stan. Moved from the Ukraine about 2 years ago. Have some experience racing over there (mostly streetracing as it's NOT illegal there). JDM drag racing champion of the Ukraine. Founder of the StreetForce racing club.

Bought my GST about 2 months ago 100% stock. Started with exterior (80% complete - see gallery). Now want to start with engine and suspension mods. Goal - 350whp and circuit/autocross setup. Have no experience with DSMs, so I'd be happy to meet you all and listen to your advices in this matter.

Thanks in advance

See y'all there...

 

[gotboost8]

im there i got off of work already i hope that this will be a good meet tell me what we need i will try to help

 

[hdoerr]

Welcome AutoExec you don't have to bring much to the meet just 30 bucks or so and we normally start a list so that everyone doesn’t bring napkins and forks. It costs 10 bucks to watch the races or 15 to race. So if you bring some one it could cost around 20 to 30 bucks. L8R

 

[Rotian]

1st Off, Welcome AutoExec. You'll find a good bunch of folks at these meets. Everyone is happy to see a descent line-up of DSMs. Some like to keep it cruiser, some like to break things every weekend chasing the sound barrier...

As I figured, I'm now in need of a 1G ECU. If anyone has one floating around MD165531 I'll make a descent offer!

 

[DSM_PWR]

some like to break things every weekend chasing the sound barrier...

Guilty

 

[AutoExec]

Thanks, guys. Looks like you're all friendly, that's nice! I can't wait for this meeting to begin.

Oh, by the way. Don't consider this an ad please... I'm parting out another 97 GST. If anybody needs any parts, let me know when you see me at this meeting. I live just about 1 mile away from Rocky's shop.