|
Hey guys, here is a little log. I just got the car back together after a little winter break (although it is snowing right now) and am starting to tune the S256 again.
Here is my first log, at 16psi in 2nd gear. It isn't much of one. I wasn't even full throttle, but take a look at the airflow, gm3.3bar, and hp estimate. I will have to get a log of low rpm full throttle, so spool up characteristics can be seen
It looks like boost est is about 1 psi more, but I am running a stock mas with fake maf currently turned off. Air temps look to be 62 degrees, so airflow is looking to be pretty close. HP estimate is showing 323WHP with zero drivetrain loss entered. I am at 6000ft.
Don't pay attention to my PLXWB. It was reading way leaner than normal because of an exhaust leak. I fixed that this evening.
Remember, this is on a bolt on housing and I let off at around 6800-7000 rpm.
Josh
|