The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Post a Question

Stuff needed for Dec 8th

Please Support ExtremePSI

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

carslinger

carslinger

15+ Year Contributor
41
0
Jan 19, 2004
Round Rock, Texas
Well..... It looks like my Aem ems may not be here till next mon and I am not sure if the car will be ready to run. With that being said I may end up being on the support team for you guys rather than running my own car. I am mostly set up for the 1g car for tunning etc...but I will try to help all of you there running get your cars strait....( if you need help). Lets get a roll call on who is going and what if anything they would like to achieve on the track so I can try to be prepared with tools etc......I have a laptop and logger available using Tmo if you are a 1g with stock ecu.

I look forward to another good showing..........

Corey:cool:
 
DSM_PWR said:
Well... i was gunna tune my safcII when i drop my evo III 16g:D in but if you can help me tune it so i can get a good before & after time, that would help:thumb:
Click to expand...


Afc is easy......What do you have for mods? Egt gauge?Logger?
 
Just whats on my profile... i was gunna have "Protech" dyno/tune it when i drop in the turbo w/650cc injectors since it wont really make toooo much of a difference right now. but if you could help show me how to tune it now i guess it wouldnt hurt.
 
DSM_PWR said:
Just whats on my profile... i was gunna have "Protech" dyno/tune it when i drop in the turbo w/650cc injectors since it wont really make toooo much of a difference right now. but if you could help show me how to tune it now i guess it wouldnt hurt.
Click to expand...

We can do that.....
 
hdoerr said:
Oh Oh I want to play when you all tune DSM PWR car. I could be the base line for what you don't want the results to be.:tease:
Click to expand...

:cry: Crybaby......


:nono: Don't worry yours will be done up very soon:thumb:

The question is.........How's your driver mod? OMG
 
So that I don't sound like liar here is my sit. rep. The car is getting the B/C, Wideband O2, and EGT gauges installed as we speak. The Aluminum radiator and 910CFM puller are part of the work being done. Here is the problem, the center support bearings are really bad and won't hold up to any launches, the bearings are on order and should, I repeat, should be replaced by the middle of next week. I have an APEXI 3" turbo back being installed early next week as well so if all goes well then yes I am running but if the shaft isn't up to it I just won't take the risk. I just placed an order from Dejon Powerhouse for their upper and lower 2.5 inch I/C pipes flanges for the HKS SS blow off valve. I am going to re-circulate of course but that mod is a X-mas present and won't be on the car until then. Blah Blah Blah...I know
 
hdoerr said:
So that I don't sound like liar here is my sit. rep. The car is getting the B/C, Wideband O2, and EGT gauges installed as we speak. The Aluminum radiator and 910CFM puller are part of the work being done. Here is the problem, the center support bearings are really bad and won't hold up to any launches, the bearings are on order and should, I repeat, should be replaced by the middle of next week. I have an APEXI 3" turbo back being installed early next week as well so if all goes well then yes I am running but if the shaft isn't up to it I just won't take the risk. I just placed an order from Dejon Powerhouse for their upper and lower 2.5 inch I/C pipes flanges for the HKS SS blow off valve. I am going to re-circulate of course but that mod is a X-mas present and won't be on the car until then. Blah Blah Blah...I know
Click to expand...


Now all we have to do is to upgrade your driver mod to ME and were in the 10's for sure :sneaky:
 
hdoerr said:
Correct I do and I know that if my car was capable of 10's it would have a rocket mounted somewhere.:D
Click to expand...

Well the heading on the thread is "Stuff needed of Dec 8th", So in your case it looks like the answer would be:

Rocket....:cool:
 
Some of the members will be meeting up in various cities such as Austin, San Marcos and then San Antonio, and then we are all heading to the san antonio raceway
 
Cool, where are people meeting in Austin? I'm up for it, hopefully if I get it tuned my car will be up for SAR too.
 
hey did some of you hear that they wanted to meet on dec 16th for Import Blowout? im still gunna go dec 8th if any one else wants to but just to let ya know

oh and carslinger. could u help me tune my safc sometime this week?
 
Mine too. haha You guys should let me know if you get together before saturday, I'd like to come too.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Boosted Fabrication
ECM Tuning
ExtremePSI
FIBA Motorsport
Fuel Injector Clinic
Innovation Products
Jacks Transmissions
JNZ Tuning
Kiggly Racing
Morrison Fabrications
Rix Racing
RockAuto
STM Tuned
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top