AEM Twin Spark ????

[speedmaster747]

Has anyone here used it?

I was thinking of feeding the two channels from the stock Mitsubishi Igniton and turning them into individual outputs for every coil on the COP setup.
sort of like this:

You must be logged in to view this image or video.

Instead of like this:

You must be logged in to view this image or video.

What do you guys think ?
ANy feedback is welcome.

 

[Staytuned]

I am ordering this one this week ..... plugs right into the stock coil harness. You should look into this one. I am also using a 300m COP setup that has the stock OEM style plug that goes right into the stock wiring harness.

http://www.jnztuning.net/proddetail.php?prod=DYNA_ARC-2a

 

[speedmaster747]

Interesting! I'm going to look into this.

Anybody else have installed the COP system along with:

MSD DIS 2
MSD DIS 4
AEM Twin Spark
Crane CDI2 ??????
Let me know your feedbacks.

 

[Staytuned]

From what I have read on NABR they are all less than reliable and usually end up broken. I have no personal experience with them. But if the big guys are saying bad things about them I am going with the ARC-2 setup.

 

[Spyder4g64]

Anyone do this? Have any pictures? I am interseted as well.

 

[Staytuned]

I might have pics and instructions up tonight.

 

[dsmmack]

From what I have read on NABR they are all less than reliable and usually end up broken. I have no personal experience with them. But if the big guys are saying bad things about them I am going with the ARC-2 setup.

A few local guys have had bad experiences with the Twin Spark's as well. It seems to be a common problem with them. Few threads on the AEM board about them dying out all the time.

I have a DIS-4 but don't yet have a COP. I plan to run the COP setup with the 4 channels if I ever end up getting a COP setup. (the DIS-4 was from my old v6 car from years back, Only reason I have it in the first place)

 

[speedmaster747]

A few local guys have had bad experiences with the Twin Spark's as well. It seems to be a common problem with them. Few threads on the AEM board about them dying out all the time.

I have a DIS-4 but don't yet have a COP. I plan to run the COP setup with the 4 channels if I ever end up getting a COP setup. (the DIS-4 was from my old v6 car from years back, Only reason I have it in the first place)

Someone finally shares the same idea as me! If I get to do it first I will post some pics!

 

[inneedof]

Tom from rrev has used it on his colt and burned 2 or 3 of them up, i would personally go with an m and w box