ProSport Gauges

[silvercoupe97]

I can't open that link for some reason.

 

[AndrewD5418]

Just in case nobody noticed, Prosport now has CLEAR lense with amber or white backlit. The pictures on their site look so much more like stock.

 

[Ajax]

I wonder if they would just sell you those clear lenses?

 

[AndrewD5418]

I wonder if they would just sell you those clear lenses?

Doubtful since you'd have to take the gauge apart and that would probably void their warranty. Sell current no ebay and buy new .

 

[stephen240]

I just wired up mine today. I asked Defiant if I could make a tech article on this matter. Hopefully he says yes, and I'll post the link here and other places amongst the forums for everyone that had any questions about the prosport boost gauge.

If anyone needs an immdiate question answered just pm me!

 

[jm1080]

I installed a prosport electric boost and oil pressure gauges. It seems that the lighting doesn't quite work right. If I turn the lights on, they go from white to amber, which is good. If I turn my cruise on, they go back to white...Also if I start the car with the lights on, they will stay white and not turn to amber even if I shut the lights off and turn them back on. Anybody else having similar problems? I have them hooked up to the green and white wire and the cig. lighter for the lighting wires.

I have this same issue as well...I was going to post a thread about it. Mine are white in the day and amber at night (when I turn lights on)

Now when it is day its perfect, but when they are amber at night, they go white when either I use turn signal (only left turn signal) I know real weird.. Also when I downshift or go into reverse they turn back to white!! WTF

Anyone know why this is happening?!?!?! Gets real frustrating!!

 

[stephen240]

I have this same issue as well...I was going to post a thread about it. Mine are white in the day and amber at night (when I turn lights on)

Now when it is day its perfect, but when they are amber at night, they go white when either I use turn signal (only left turn signal) I know real weird.. Also when I downshift or go into reverse they turn back to white!! WTF

Anyone know why this is happening?!?!?! Gets real frustrating!!

Hey man I just wired mine up today and I'm gonna do a tech write up tomorrow and I'll post it in here so you can see where I wired all my shiz up. If u need an immediate answer pm me!

 

[Imback]

i thought i was the only one. I got used to them turning back to white but mine aren't as sensitive as yours. Them going back to white only happens on rainy days when i use the wipers. Were did you tap into for your power source??

 

[stephen240]

Hey guys I'm making that write up tomorrow after I get off work in about 5 hours so expect it to be up around 6 or 7 pm est!!

Sorry for the delay of my write up but had family matters that took a priority.