cbellsondsm
15+ Year Contributor
- 156
- 0
- Jan 17, 2004
-
lake villa,
Illinois
My late 92 tsi stalls when ever i let off of the throttle and put the car in neutral to coast. I cant seem to figure out what would cause this. I have tried many things.
Mods
t3/t4 v-trim turbo
SBR manifold
Apex 3-inch turbo back
Evo 3 o2 housing
650cc injectors
Walbro 190 fuel pump
S-AFC
Datalogger
full intercooler piping
big side mount intercooler
act2600
2g mas
key diver eprom chip
This is what i have tried doing so far. Changed ISC motor, changed throttle position sensor, cleaned throttle body out, put back on 1g mas, put back in 450cc injectors, and swapped a different stock ecu into my car. Nothing seems to stop it from running rich when ever I slightly let off of the throttle which is what is causing it to stall. Putting back in the 1g mas did help with the problem but didn't fix it. As the car doesn't stall as easy but on the datalogger i can still see that it is running rich when ever i slightly let off of the throttle. Could the throttle body just need to be changed? Could it be the turbo flowing to much? Could it be a vacume leak? Please help me!!!
Mods
t3/t4 v-trim turbo
SBR manifold
Apex 3-inch turbo back
Evo 3 o2 housing
650cc injectors
Walbro 190 fuel pump
S-AFC
Datalogger
full intercooler piping
big side mount intercooler
act2600
2g mas
key diver eprom chip
This is what i have tried doing so far. Changed ISC motor, changed throttle position sensor, cleaned throttle body out, put back on 1g mas, put back in 450cc injectors, and swapped a different stock ecu into my car. Nothing seems to stop it from running rich when ever I slightly let off of the throttle which is what is causing it to stall. Putting back in the 1g mas did help with the problem but didn't fix it. As the car doesn't stall as easy but on the datalogger i can still see that it is running rich when ever i slightly let off of the throttle. Could the throttle body just need to be changed? Could it be the turbo flowing to much? Could it be a vacume leak? Please help me!!!
It was my FPR. It was stuck shut. Check that FPR.