Need a little help setting up my SAFC-II(PLEASE!!)

[TSiGoesPsSsSst]

I was wondering if anyone could give me some base settings,where the car should run half-way decent I would greatly appreciate any help at all.

Im running a PTE 50 Trim
No AFPR (I know bad,but it will change soon)
255lph walbro
650cc injectors

Thanks.Youll be helping me out ALOT

 

[HighPsiAwd]

Well I have the exact same fuel setup as you only running a GT30 56 trim. Had it wideband tuned at 11:1 at 20psi on 92 octane pump


Low Settings=

1K- 10
2k- 22
3K- 25 rest of the way up

High Settings=

3K -30
4K -30
5K -30
5.6K -28
6K -28
7K -27
7.5K -27

Good luck

 

[CanadianTSi]

Yep I would agree. I would put the highs at like -25 at first to be safe and see if you can go any leaner from there.

And for the Low's...only your logger can tell you that

 

[TSiGoesPsSsSst]

guys thanks so much.I think I found out my cars problem now (see my other thread - http://www.dsmtuners.com/forums/showthread.php?t=171817)

My car was only drivable with +40 to 50% on the highs.and about -1% in the lows.Anything closer to zero and it did not want to move at all.It would only would boost about 6 or 7 psi then start to bog and backfire like crazy.The car mustve been running piss rich.

 

[CanadianTSi]

Piss Rich would be an understatement...I hope you didn't damage anything by washing down the cylinder walls with so much fuel.