The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Morrison Fabrication

What is Power Braking?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ETalon95

15+ Year Contributor
232
0
Sep 11, 2004
Whitehall, Pennsylvania
I know this is a dumb question but how do you powerbrake or what is it???
 
powerbraking is when you use the brakes with an automatic car to build engine rpm before launching. Basically the car is in gear and you have a foot on the brake and the other on the gas. The brakes hold the car in place so you can launch at a higher rpm than idle. Mostly this is done in automatic RWD cars to do a burnout without the car moving much. I would highly suggest you not try this on a stock automatic tranny. If you have a built racing tranny with a high stall torque converter, shift kit, etc then go for it and tear the dragstrip up.
 
It is a method of launching an AT car. Mash the brake and step on the gas at the same time, and just watch your boost gauge. Don't stall past roughly 2500, don't stall for more than a few seconds, and give yourself adequate cool down time.
Mike
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top