Stroker Question

[djmixerx]

i need to know what is the part number for the 6 bolt 4g64 crank? or is the g64b crank the same? could u use the g64b crank with a 4g63 block. is it the same as the 4g64?

Also need the part # for the clevite bearings or the mitsu one or both.

 

[kooka]

i need to know what is the part number for the 6 bolt 4g64 crank? or is the g64b crank the same? could u use the g64b crank with a 4g63 block. is it the same as the 4g64?

g64b is for 6 bolt.

4g64 is for 7 bolt.

yes, you can use g64b crank in a 4g63, as long as its a 6bolt. No, it is not the same as the 4g64 crank, because the 4g64 crank is for a 7bolt.

Got it? Good. Any more questions like this, just type "stroker" in the search function and you will find everything you could possibly need to know about a stroker motor, including your part #'s.

Good Luck.

 

[me612]

Also a crank out of a Hyundai g4cs will work for this. Searching the vendors sites for bearing part numbers would be a good place to start.

 

[djmixerx]

does anyone know if the g64b main bearings the same as the 4g63T???

 

[Precision]

does anyone know if the g64b main bearings the same as the 4g63T???

Yup.

 

[djmixerx]

thanks

 

[BGizzlePatrick]

I just went through the same thing. I am going to go with a stroker myself and the prices for the stroker kits where too high for me to pay off at one time so i went ahead and got all the parts (crank, pistons, and rods) seperate and saved a bunch of money. If you want the crank for a 1g motor (6bolt) you can get them for a good price at www.slowboyracing.com they have them new and used. Either one is cheaper than you can find them at any other place including ebay (as far as i know at least) and yes that 6 bolt crank will be made by hyundai and not mitsu.